Brass inserts for PPR
Marangon Danilo & C produces brass inserts used in PPR moulding for the transportation of cold and hot water; the inserts have a thread that goes from 3/8” to a maximum of 5”. Following the client’s specifications and with the involvement of the company prototypers and designers, we can produce made-to-measure fittings for each type of requirement
Technical specifications
FEMALE | 3/8″, 1/2″, 3/4″, 1″, 1″1/4, 1″1/2, 2″, 2″1/2, 3″, 4″, 5″ |
MALE | 3/8″, 1/2″, 3/4″, 1″, 1″1/4, 1″1/2, 2″, 2″1/2, 3″, 4″, 5″ |
Materials used
The materials used to produce brass inserts are European, more precisely from Germany and Italy. Marangon Danilo & C uses the best raw material producers currently on the market.
CW614N (CuZn39Pb3), CW617N (CuZn40Pb2), CW602N (CuZn36Pb2As), CW511L (CuZn38As), Cuphin (CuZn21Si3P)
Other materials
The productive flexibility of Marangon Danilo & C Srl means that the company can work with other materials, such as bronze with the following technical specifications
CC491K (CuSn5Zn5Pb5-C) o CC499K (CuSn5Zn5Pb2-C).
Brass insert threads
When requested by the client, the different brass insert threads can be:
R | UNI EN 10226-1, UNI EN 10226-2 |
Rp | UNI EN 10226-1 |
Rc | UNI EN 10226-2 |
Gas | ISO 228 |
NPT | ANSI/ASME B1.20.1 |
NPSC | ANSI/ASME B1.20.1 |
M | ISO 262 |
Surface treatments
The brass inserts can be supplied both untreated and with a nickel surface treatment.
Brass inserts for PE
Marangon Danilo & C produces brass inserts used in PE moulding with threads that range from 3/8” up to a maximum of 5”. Following the specifications of the client, and with the subsequent involvement of the company’s prototype team, made-to-measure fittings can be produced for any kind of need.
Technical specifications
Female | 3/8″, 1/2″, 3/4″, 1″, 1″1/4, 1″1/2, 2″, 2″1/2, 3″, 4″, 5″ |
Male | 3/8″, 1/2″, 3/4″, 1″, 1″1/4, 1″1/2, 2″, 2″1/2, 3″, 4″, 5″ |
Materials used
The materials used to produce the brass inserts are European, more precisely from Germany and Italy. Marangon Danilo & C uses the best raw material producers currently on the market.
CW614N (CuZn39Pb3), CW617N (CuZn40Pb2), CW602N (CuZn36Pb2As), CW511L (CuZn38As), Cuphin (CuZn21Si3P).
Other materials
The productive flexibility of Marangon Danilo & C Srl means that the company can work with other materials, such as bronze with the following technical specifications
CC491K (CuSn5Zn5Pb5-C) o CC499K (CuSn5Zn5Pb2-C).
Brass insert threads
When requested by the client, the different brass insert threads can be:
R | UNI EN 10226-1, UNI EN 10226-2 |
Rp | UNI EN 10226-1 |
Rc | UNI EN 10226-2 |
Gas | ISO 228 |
NPT | ANSI/ASME B1.20.1 |
NPSC | ANSI/ASME B1.20.1 |
M | ISO 262 |
Surface treatments
The brass inserts can be supplied both untreated and with a nickel surface treatment
Brass inserts for CPVC
Marangon Danilo & C produces brass inserts used in PE moulding with threads that range from 3/8” up to a maximum of 5”. Following the specifications of the client, and with the subsequent involvement of the company’s prototype team, made-to-measure fittings can be produced for any kind of requirement.
Technical specifications
Female | 3/8″, 1/2″, 3/4″, 1″, 1″1/4, 1″1/2, 2″, 2″1/2, 3″, 4″, 5″ |
Male | 3/8″, 1/2″, 3/4″, 1″, 1″1/4, 1″1/2, 2″, 2″1/2, 3″, 4″, 5″ |
Materials used
The materials used to produce the brass inserts are European, more precisely from Germany and Italy. Marangon Danilo & C uses the best raw material producers currently on the market.
CW614N (CuZn39Pb3), CW617N (CuZn40Pb2), CW602N (CuZn36Pb2As), CW511L (CuZn38As), Cuphin (CuZn21Si3P).
Other materials
The productive flexibility of Marangon Danilo & C Srl means that the company can work with other materials, such as bronze with the following technical specifications
CC491K (CuSn5Zn5Pb5-C) o CC499K (CuSn5Zn5Pb2-C).
Brass insert threads
When requested by the client, the different brass insert threads can be:
R | UNI EN 10226-1, UNI EN 10226-2 |
Rp | UNI EN 10226-1 |
Rc | UNI EN 10226-2 |
Gas | ISO 228 |
NPT | ANSI/ASME B1.20.1 |
NPSC | ANSI/ASME B1.20.1 |
M | ISO 262 |
Surface treatments
The brass inserts can be supplied both untreated and with a nickel surface treatment
Brass inserts for PPSU and PVDF
Marangon Danilo & C produces brass inserts used in PPSU and PVDF moulding for transporting hot and cold water. The inserts have threads that range from 3/8” up to a maximum of 5”. Following the specifications of the client, and with the subsequent involvement of the company’s prototype team, made-to-measure fittings can be produced for any kind of requirement.
Technical specifications
FEMALE | 3/8″, 1/2″, 3/4″, 1″, 1″1/4, 1″1/2, 2″, 2″1/2, 3″, 4″, 5″ |
MALE | 3/8″, 1/2″, 3/4″, 1″, 1″1/4, 1″1/2, 2″, 2″1/2, 3″, 4″, 5″ |
Materials used
The materials used to produce the brass inserts are European, more precisely from Germany and Italy. Marangon Danilo & C uses the best raw material producers currently on the market.
CW614N (CuZn39Pb3), CW617N (CuZn40Pb2) e CW602N (CuZn36Pb2As), CW511L (CuZn38As), Cuphin (CuZn21Si3P)
Other materials
The productive flexibility of Marangon Danilo & C Srl means that the company can work with other materials, such as bronze with the following technical specifications
CC491K (CuSn5Zn5Pb5-C) o CC499K (CuSn5Zn5Pb2-C).
Brass insert threads
When requested by the client, the different brass insert threads can be:
R | UNI EN 10226-1, UNI EN 10226-2 |
Rp | UNI EN 10226-1 |
Rc | UNI EN 10226-2 |
Gas | ISO 228 |
NPT | ANSI/ASME B1.20.1 |
NPSC | ANSI/ASME B1.20.1 |
M | ISO 262 |
Surface treatments
The brass inserts can be supplied both untreated and with a nickel surface treatment
Brass inserts for filters
Marangon Danilo & C produces brass inserts used in water filter moulding with threads from 1/8” to 1 ½”. Following the specifications of the client, and with the subsequent involvement of the company’s prototype team, made-to-measure fittings can be produced for any kind of requirement.
Technical specifications
INSERTS | 1/8″, 1/4″, 3/8″, 1/2″, 3/4″, 1″, 1″1/4, 1″1/2 | |
NIPPLES | 1/2″-1/2″, 3/4″-3/4″, 1″-1″ | |
CAP | 1/8″ | |
Materials used
The materials used to produce the brass inserts are European, more precisely from Germany and Italy. Marangon Danilo & C uses the best raw material producers currently on the market.
CW614N (CuZn39Pb3), CW617N (CuZn40Pb2), CW602N (CuZn36Pb2As), CW511L (CuZn38As), Cuphin (CuZn21Si3P).
Other materials: bronze
The productive flexibility of Marangon Danilo & C Srl means that the company can work with other materials, such as bronze with the following technical specifications
CC491K (CuSn5Zn5Pb5-C) o CC499K (CuSn5Zn5Pb2-C).
Brass insert threads
When requested by the client, the different brass insert threads can be:
R | UNI EN 10226-1, UNI EN 10226-2 |
Rp | UNI EN 10226-1 |
Rc | UNI EN 10226-2 |
Gas | ISO 228 |
NPT | ANSI/ASME B1.20.1 |
NPSC | ANSI/ASME B1.20.1 |
M | ISO 262 |
Surface treatments
The brass inserts can be supplied both untreated and with a nickel surface treatment
Personalised inserts
Marangon Danilo & C produces brass turned articles with a diameter of from 20 mm to 135 mm following the specific design of the client.
Our work as “outsourcers” covers the most varied sectors of use, and our staff dedicate the highest levels of attention and professionality to them in order to obtain a better end result.
Materials used
The materials used to produce the brass inserts are European, more precisely from Germany and Italy. Marangon Danilo & C uses the best raw material producers currently on the market.
CW614N (CuZn39Pb3), CW617N (CuZn40Pb2), CW602N (CuZn36Pb2As), CW511L (CuZn38As), Cuphin (CuZn21Si3P)
Other materials: bronze
The productive flexibility of Marangon Danilo e & C srl means that the company can work with other materials, such as bronze with the following technical specifications
CC491K (CuSn5Zn5Pb5-C) o CC499K (CuSn5Zn5Pb2-C).